Maxtough

G209 Crosby Maxtough Galvanized Screw Pin Anchor Shackle Grade 6 USA

(No reviews yet) Write a Review

SKU:
UPC:
Condition:: New
Availability:: Allow 7-14 days for delivery but delivery may be sooner depending on component availability.
Weight:: 0.00 LBS
Shipping:: Calculated at Checkout

$9.48 - $1,591.00

Current Stock:

Quantity:

Description
Warranty Info
Additional Info
Safety Information

Description

Meets performance requirements of Grade 6 shackles.
Forged, Quenched & Tempered, with alloy pins.
Working Load Limit and Grade 6 permanently shown on every shackle.
Hot-dip galvanized (G) or self colored (S).
Sizes 3/8 inch and below are mechanically galvanized.
Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.
Shackles 25t and larger are RFID equipped.
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
Proof testing and certification available when requested at the time of order, charges will apply.
Approved for use at -40° C (-40° F) to 204° C (400° F).
All 209 and 210 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg. at -20° C (-4° F) upon special request.
Meets or exceeds all requirements of ASME B30.26.
Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available.
Certificates available when requested at time of order and may include additional charges.
G-209 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 2, except for those provisions required of the contractor.
Look for the Red Pin®... the mark of genuine Crosby quality.