Crosby

G-2140 Crosby Alloy Bolt Type Anchor Shackle Grade 8 (American Made)

(No reviews yet) Write a Review
Condition:
New
Availability:
Allow 7-14 days for delivery but delivery may be sooner depending on component availability.
Weight:
0.00 LBS
Shipping:
Calculated at Checkout
  • G-2140 Crosby Alloy Bolt Type Anchor Shackle
  • Western Sling Company Graphic - 21 Sizes
  • Western Sling Company Graphic - Made in USA
$42.63 - $28,015.90

Description

  • Quenched & Tempered.
  • Alloy bows, alloy bolts.
  • Forged alloy steel 2 through 250 metric tons. Cast alloy steel 400 metric tons.
  • Meets performance requirements of Grade 8 shackles.
  • Working Load Limit is permanently shown on every shackle.
  • 30, 40, 55, and 85 metric ton shackle bows are available galvanized (G) or self colored (S) with bolts that are galvanized and painted red.
  • Sizes 3/8 inch and below are mechanically galvanized.
  • 120, 150, 175 metric ton shackle bows are hot-dip galvanized; bolts are Dimetcoted and painted red.
  • 200, 250, 300, 400 metric ton shackle bows are Dimetcoted; bolts are Dimetcoted and painted red.
  • Sizes 1-1/2 and larger are RFID equipped.
  • Approved for use at -40° C (-40° F) to 204° C (400° F).
  • Shackles are Quenched & Tempered and can meet DNV impact requirements of 42 Joules (31 ft-lb) at -20° C (-4° F).
  • All sizes are individually proof tested to 2.0 times the Working Load Limit.
  • Crosby COLD TUFF® shackles that meet the additional requirements of DNV rules for certification of lifting applications - loose gear are available.
  • Shackles 200 metric tons and larger are provided as follows:
    • Serialized bolt and bow
    • Material certification (chemical)
    • Magnetic particle inspected.
    • Certification must be requested at time of order.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. 2140 shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
  • Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliances. Certificates available when requested at time of order and may include additional charges.
  • G-2140 meets the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade B, Class 3, except for those provisions required of the contractor. For additional information, see Warnings & Applications.
  • Look for the Red Pin®... the mark of genuine Crosby quality.
View AllClose

Warranty Info

Standard Manufacturer's Warranty
View AllClose

Additional Info

Manufacturer:
Crosby
Brand:
Crosby
Description:
G-2140 Alloy Bolt Type Anchor Shackle
Crosby Catalog #:
G-2140
Grade:
8
Finish:
Galvanized
Country of Origin:
US
Standard:
ASME B30.26
View AllClose