Hooks / Hoist Rings / Eye Bolts

Metric Swivel Hoist Rings for the Wind Industry Since our inception in 1989, Actek® Manufacturing & Engineering has established a reputation for providing top-quality products as well as excellent service.Our friendly and...

Ratings below are for use with chain slings fabricated in accordance with ASME B30.9. For other applications, see page 160. Alloy Steel – Quenched and Tempered. Proof Tested with special fixtures sized to prevent localized point loading. See...

CLX Grade 100 Alloy Connecting Link Made in Italy Equal in form and function to other brand name connecting links ie: Lok-A-Loy, Hammerloc

Get a connection you can count on with these sturdy connecting links!.  Proof tested at double its working load limit 25% stronger than grade 80 chain Heat-treated Finished with a rust-preventive coating    When investing in...

VLBG Load ring, metric thread with variable length, comes with locknut and washer Tried and tested – full WLL in all directions              Quick and easy installation with just one...

      Cartec AKX Welded Master Link Assembly Grade 100 Powder Coated Finish Made in Italy

      Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP wire rope. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and...

All Crosby L-320 Eye Hoist Hooks incorporate the following features: The most complete line of Eye hoist hooks. Available in carbon steel and alloy steel. Designed with a 5:1 Design Factor for (Carbon Steel); 4.5:1 Design Factor for 30t - 60t (Alloy...

Top washer has the following features:• The Working Load Limit and Recommended Torque value are permanently stamped into each washer.• Washer is color coded for easy identification: Red - UNC thread.• Individually Proof Tested to 2-1/2 times Working Load...

 Since our inception in 1989, Actek® Manufacturing & Engineering has established a reputation for providing top-quality products as well as excellent service.Our friendly and knowledgeable personnel are here to assist you with...

      VWBG Load ring, UNC thread Diversity, no matter how you turn it          Rotating 360°, pivoting 230° Optical markings for easy determination for withdraw from service Ball...

Cartec AX Welded Master Link Grade 100 Powder Coated Finish Made in Italy

All Crosby L-320 Eye Hoist Hooks incorporate the following features: The most complete line of Eye hoist hooks. Available in carbon steel and alloy steel. Designed with a 5:1 Design Factor for (Carbon Steel); 4.5:1 Design Factor for 30t - 60t (Alloy...

Equipped with Tapered Roller Thrust Bearing• Suitable for frequent rotation under load.• All swivels individually proof tested with labeled documentation.• All hooks furnished with latches assembled.• All jaws complete with bolts, nuts and cotter pins.•...

Top washer has the following features: The Working Load Limit and Recommended Torque value are permanently stamped into each washer. Washer is color coded for easy identification: Silver - Metric thread. Individually Proof Tested to 2-1/2 times Working...

 Since our inception in 1989, Actek® Manufacturing & Engineering has established a reputation for providing top-quality products as well as excellent service.Our friendly and knowledgeable personnel are here to assist you with...

Get a durable rope fitting you can count on! 5:1 safety factor Enjoy the durability of high-tensile steel Works in almost all conditions, in temperatures ranging from  -40°C to +200°C You need the best tools to get a snug fit on...

Forged Alloy Steel - Quenched and Tempered. Individually Proof Tested to 2-1/2 times the Working Load Limit with certification. Each hook has a Product Identification Code (PIC) for material traceability, along with the size and the name Crosby and U...

      Equipped with Tapered Roller Thrust Bearing• Suitable for frequent rotation under load.• All swivels individually proof tested with labeled documentation.• All hooks furnished with latches assembled.• All jaws...

Equipped with Tapered Roller Thrust Bearing• Suitable for frequent rotation under load.• All swivels individually proof tested with labeled documentation.• All hooks furnished with latches assembled.• All jaws complete with bolts, nuts and cotter pins.•...

Equipped with Tapered Roller Thrust Bearing• Suitable for frequent rotation under load.• All swivels individually proof tested with labeled documentation.• All hooks furnished with latches assembled.• All jaws complete with bolts, nuts and cotter pins.•...

      Forged Steel - Quenched & Tempered.• Working Load Limits shown are for in-line pull. For angle loading, see page 200.• Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.• Recommended for...

Forged bail provides the following: Easily readable Raised Lettering showing the name Crosby or CG and PIC Code for material traceability. Greater durability providing the increased Toughness desired in potentially abusive field conditions. Larger...

 Since our inception in 1989, Actek® Manufacturing & Engineering has established a reputation for providing top-quality products as well as excellent service.Our friendly and knowledgeable personnel are here to assist you with...

The Green Pin® JJ Turnbuckle BN is a turnbuckle with jaw-jaw end-fitting and a safety bolt, generally to ASTM F1145-92. One of the unique features of Green Pin® Turnbuckles such as this one is that they can be used for both lifting...

Heavy duty stamped latch interlocks with the hook tip. High cycle, long life spring. Can be made into a “Positive Locking” Hook when proper cotter pin is utilized. Latch kits shipped unassembled and individually packaged with instructions...

      Forged Steel - Quenched and Tempered.• Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles.• Working Load Limits shown are for in-line pull. For angle loading, see page 200.• Meets or exceeds all...

 UB500 Overhaul Balls are available in Top Swivel and Non-Swivel configurations. • Available in capacities from 4 to 30 tons.• Design factor of 4 to 1.• All McKissick® Overhaul Balls are RFID equipped. All hooks used on UB500...

Forged bail provides the following: Easily readable Raised Lettering showing the name Crosby or CG and PIC Code for material traceability. Greater durability providing the increased Toughness desired in potentially abusive field conditions. Larger...

The Green Pin® EE Turnbuckle is a turnbuckle with eye-eye end-fittings, generally to ASTM F1145-92. One of the unique features of Green Pin® Turnbuckles such as this one is that they can be used for both lifting and lashing...

 UB500 Overhaul Balls are available in Top Swivel and Non-Swivel configurations. • Available in capacities from 4 to 30 tons.• Design factor of 4 to 1.• All McKissick® Overhaul Balls are RFID equipped. All hooks used on UB500 Overhaul Balls (S320, S320N...

Wide range of capacities available: 650 lbs. to 29,000 lbs. Metric sizes from 0.3 tonnes to 13 tonnes. Body components are Alloy Steel - Quenched and Tempered. Rated at 100% of Working Load Limit for angles up to 90 degrees. Each product is stamped with...

Equipped with Tapered Roller Thrust Bearing• Suitable for frequent rotation under load.• All swivels individually proof tested with labeled documentation.• All hooks furnished with latches assembled.• All jaws complete with bolts,...

UB500 Overhaul Balls are available in Top Swivel and Non-Swivel configurations. • Available in capacities from 4 to 30 tons.• Design factor of 4 to 1.• All McKissick® Overhaul Balls are RFID equipped. All hooks used on UB500...

Wide range of capacities available: 650 lbs. to 29,000 lbs. Metric sizes from 0.3 tonnes to 13 tonnes. Body components are Alloy Steel - Quenched and Tempered. Rated at 100% of Working Load Limit for angles up to 90 degrees. Each product is stamped...

Equipped with Tapered Roller Thrust Bearing• Suitable for frequent rotation under load.• All swivels individually proof tested with labeled documentation.• All hooks furnished with latches assembled.• All jaws complete with bolts,...

 UB500 Overhaul Balls are available in Top Swivel and Non-Swivel configurations. • Available in capacities from 4 to 30 tons.• Design factor of 4 to 1.• All McKissick® Overhaul Balls are RFID equipped. All hooks used on UB500 Overhaul Balls (S320, S320N...

 Attaches easily to Wireline.

• Forged Steel - Quenched and Tempered. • Excellent welding qualities. • Widely used on farm machinery, trucks, steel hulled marine vessels and material handling equipment. • Reference American Welding Society specifications for...

        Forged alloy bow with an industry best 6 to 1 performance design factor Patent pending captured bolt can withstand over 2,000 lbs. (907 kg) of pull-out force Galvanized bow with an API RP 17H color compliant coating On...

All SHUR-LOC® hooks have the following features: Forged Alloy Steel - Quenched and Tempered. Recessed trigger design is flush with the hook body, protecting the trigger from potential damage Easy to operate with enlarged thumb access. Positive...

        Forged alloy bow with an industry best 6 to 1 performance design factor Patent pending captured bolt can withstand over 2,000 lbs. (907 kg) of pull-out force Galvanized bow with an API RP 17H color compliant coating On...

Forged Alloy Steel – Quenched and Tempered. Individually Proof Tested at 2-1/2 times the 4:1 Working Load Limit with certification. Recessed trigger design is flush with the hook body, protecting the trigger from potential damage. Easy to...

Hook identification code stamped on each hook. Quenched and Tempered QUIC-CHECK® angle indicators forged into the top eye, and deformation and angle indicators forged on the hook. Fluorescent yellow finish for high "subsea" visibility. Tip...

        Developed in conjunction with major North Sea subsea operators. For efficient load handling and attachment for Remote Operating Vehicles in subsea and other hard-to-reach applications. Pad eyes are placed on either side of...

Hook identification code stamped on each hook Quenched and Tempered. QUIC-CHECK® deformation and angle indicators forged on the hook. Fluorescent yellow finish for high "subsea" visibility. Tip extension allows for easy handling. Sizes 3.2t...

        Developed in conjunction with major North Sea subsea operators. For efficient load handling and attachment for Remote Operating Vehicles in subsea and other hard-to-reach applications. Pad eyes are placed on either side of...

Forged Swivels• Hot dip Galvanized• Quenched & Tempered• Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements.Importantly,...

        Developed in conjunction with major North Sea subsea operators. For efficient load handling and attachment for Remote Operating Vehicles in subsea and other hard-to-reach applications. Pad eyes are placed on either side of...

Forged Swivels• Hot dip Galvanized• Quenched & Tempered• Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements.Importantly,...

        Developed in conjunction with major North Sea subsea operators. For efficient load handling and attachment for Remote Operating Vehicles in subsea and other hard-to-reach applications. Pad eyes are placed on either side of...

End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing. Hot Dip galvanized steel. Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle...

End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing. Hot Dip galvanized steel. Turnbuckles eyes are forged and elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For...

      Ball bearing allows hook to swivel under load Latch closes automatically under load. Hook will not open when under load. Ball bearing allows hook to swivel under load Yoke allows attachment to chain, wire rope, or synthetic...

End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing. Hot Dip galvanized steel. TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY. Forged jaw ends are fitted with bolts and nuts for 1/4" through 5/8", and...

For lifting containers in their lower fittings.

Increased efficiency, combined with outstanding safety and reliability. Manual process steps such as attaching and releasing hooks require a great deal of time and resources. Automation is a way round it – and that‘s where pewag comes in...

Increased efficiency, combined with outstanding safety and reliability. Manual process steps such as attaching and releasing hooks require a great deal of time and resources. Automation is a way round it – and that‘s where pewag comes in...

Increased efficiency, combined with outstanding safety and reliability. Manual process steps such as attaching and releasing hooks require a great deal of time and resources. Automation is a way round it – and that‘s where pewag comes in...