IPNM10N | 0-0.79" Jaw Opening | WWL 1.00t | CrosbyIP Non Marring Vertical Lifting Clamp

IPNM10N

For use in almost all sectors of industry where, during the lift or transfer, no damage to the material is permitted.

• Available in capacities of .5 , 1 and 2 metric tons (higher Working Load Limits are available upon request).
• Wide variety of jaw openings available: 0” to 1.56”, smaller than the IPNM10.
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Full 180° turning range for material transfer, turning or moving.
• Lock open, lock closed ability with latch for pretension on material and then release of material.
• Optional IP-5000 Stinger assembly available. Allows for easy connection between the clamp and hoist hook.
• Material must be clean and dry.
• There is no minimum WLL required.
• Maintenance replacement kits are available.
• Manufactured by an ISO 9001 facility.
• All sizes are RFID equipped.