Wire Rope Terminations

Fast detachable socket range for wire rope diameter 7 - 86 mm ( 5/16" - 3 3/8'' ). Basket and wedge in quenched and tempered cast steel. Wedge and basket are designed for easy installation and optimal wire rope efficiency and with the added benefit...

Hot-dip galvanized steel. The standard choice for light duty loading conditions and applications. Meets the performance requirements of Federal Specification FF-T-276b Type II, except for those provisions required of the contractor.

Available in hot-dip galvanized or stainless steel (Type 304). Stainless steel recommended for more corrosive environments where greater protection is required. Greater protection against wear and deformation of the wire rope eye. Longer service...

Forged steel sockets through 1-1/2", cast alloy steel 1-5/8" through 4". Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19 or 6 x...

Forged steel sockets through 1-1/2", cast alloy steel 1-5/8" through 4". Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19 or 6 x 37,...

Forged steel sockets through 1-1/2", cast alloy steel 1-5/8" through 4". Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19 or 6 x 37,...

Entire clip is Galvanized to resist corrosive and rusting action. Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 3/16” - 7/8” sizes, and 90% for sizes 1” through...

Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it. Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 1/8” - 7/8”...

      Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP wire rope. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature...

For flemish eye wire rope splicing. Designed for low temperature toughness. Resists cracking when swaged (equals or exceeds stainless steel sleeves). Special processed low carbon steel. COLD TUFF® for better swageability. Can be stamped for...

The Green Pin® Wire Rope Clip is a wire rope clip, generally to EN 13411-5 Type B. This wire rope clip is safer to work with as the ribs on the bearing surface of the clip prevent sliding of the wire rope. Furthermore, the wire rope clip is...

Type a description for this product here...